Compatibilizer series-PC/ABS class
PC/ABS alloy compatibilizer (GT-GS)
Product Description
This product is a special compatibilizer developed for PC/ABS and PA6/ABS by Xingete Company. This product is an unconventional copolymer of maleic anhydride and styrene, which improves the impact resistance, low-temperature resistance, and compatibility of engineering plastic alloys.
Typical Use
- PC/ABS alloy compatibilizer
- PA6/ABS alloy compatibilizer
- Reinforced PC toughener, compatibilizer
Product Features
- Improve alloy compatibility
- Improve the overall performance of the alloy
- Improved alloy processing performance
Instructions
- Blend with PC, ABS, and other resins for granulation, the recommended add amount is 2~5%。
Packaging and Storage
- Use kraft paper bag lined with plastic bag for packaging. The net weight of each bag is 25Kg. It can be stored and transported under dry conditions as non-dangerous goods. Avoid sunlight and water
Properties
|
Trademark |
Melt Index(g/10min) | Appearance | MAH content | Density(g/cm3) |
| GT-GS | 2~5 | Light yellow particles | High |
0.96-1.02 |
Performance comparison between GT-GS and EM-500 (Korea)/M521 (Japan)
|
Properties |
Measurement |
PC/ABS/GS(70/30/5) |
PC/ABS/EM500(70/30/5) |
PC/ABS/M521(70/30/5) |
|
Tensile Strength |
MPa |
56 |
55 |
54 |
|
Bending strength |
MPa |
69 |
66 |
65 |
|
Izod impact strength |
KJ/m² |
55 |
57 |
56 |
Note: In the above table, EM-500 is the powdery MBS graft copolymer of Korea LG company, and M-521 is the powdery MBS impact modifier of Japan Kane Ace company.
The above data are typical laboratory results, true and reliable, for reference only, and do not make a formal quality commitment.